Issue 456: reimport after changing full scan settings to "Centroided" doesn't actually perform centroiding

issues
Status:open
Assigned To:Brian Pratt
Type:Defect
Area:Skyline
Priority:3
Milestone:19.2
Opened:2016-02-08 by Brian Pratt
Changed:2019-06-14 by Brian Pratt
Resolved:
Resolution:
Closed:
2016-02-08 Brian Pratt
Title»reimport after changing full scan settings to "Cetnroided" doesn't actually perform centroiding
Assigned To»bspratt
Type»Defect
Area»Skyline
Priority»3
Milestone»3.6
From Jarret's email:

Hey Brian,

   I found a bug in daily, yay! I managed to make data import with centroided extraction windows (+/- 10 ppm) from data that didn't get centroided. I did this by importing the data first in profile mode, with the transitions settings at 30,000 @ 200 m/z R.P for both MS1 and MS2 data. I then changed the settings to centroided +/- 10 ppm and reimported the data. This resulted in the improperly processed data, which is attached. The data got imported using a +/- 10 ppm tolerance, but did so without first centroiding the raw data. The raw files I imported on proteome at /net/maccoss/vol5/home/jegertso/MacCoss/work/brian_centroid_repro

I'm not sure if my explanation of the issue here is adequate... so feel free to come by and I can give you a more reasonable explanation.

Best,
Jarrett

2016-02-08 Brian Pratt
Titlereimport after changing full scan settings to "Cetnroided" doesn't actually perform centroiding»reimport after changing full scan settings to "Centroided" doesn't actually perform centroiding

2019-06-14 Brian Pratt
Milestone3.6»19.2